Dell EMC D-PEXE-IN-A-00 Exam Questions - Navigate Your Path to Success

The Dell EMC Dell PowerEdge XE9680 and XE8640 Install (D-PEXE-IN-A-00) exam is a good choice for install and implement solutions and if the candidate manages to pass Dell EMC Dell PowerEdge XE9680 and XE8640 Install exam, he/she will earn Dell EMC PowerEdge Certification. Below are some essential facts for Dell EMC D-PEXE-IN-A-00 exam candidates:

TrendyCerts offers 14 Questions that are based on actual Dell EMC D-PEXE-IN-A-00 syllabus.
Our Dell EMC D-PEXE-IN-A-00 Exam Practice Questions were last updated on: Mar 03, 2025

Sample Questions for Dell EMC D-PEXE-IN-A-00 Exam Preparation

Question 1

A deployment engineer is installing a PowerEdge XE8640 server. The server is on a lift, and they have aligned the server inner rails with the rail assemble that are secured in the rack. The engineer

can only push the server into the rack a short distance before it stops. Pushing forcefully causes the rack to slide back.

What action should the deployment engineer take?

APress the mechanism on the rail to release the rail lock.

BLower the lift and move away from the server.

CPull the server out of the rack and realign the lift with the rack.

DHave a person hold the rack while using force to slide in the server.

Correct : A

Understanding Rail Locks:

The PowerEdge XE8640 server rails are equipped with a locking mechanism to secure the server during transport and installation. This prevents the server from moving unintentionally and ensures stability.

Identifying the Issue:

When the server stops after being pushed only a short distance into the rack, it is likely due to the rail lock engaging. This lock must be released to allow the server to slide fully into place.

Releasing the Rail Lock:

Locate the rail lock mechanism on the rails. This is typically a lever or button that, when pressed, releases the lock, allowing the server to slide further into the rack.

Detailed Steps:

Align the Server: Ensure that the server is properly aligned with the rails before proceeding. Misalignment can cause the server to get stuck or make it difficult to release the lock.

Press the Release Mechanism: With the server partially inserted, locate and press the release mechanism on both sides of the rails. This should disengage the locks.

Slide the Server: Once the locks are released, carefully push the server into the rack until it is fully seated. Ensure that the server is evenly aligned to avoid binding or getting stuck.

Avoiding Forceful Methods:

Avoid using excessive force to push the server into the rack as it can cause damage to the server, rails, or rack. Additionally, pushing forcefully without releasing the rail lock can lead to misalignment and potential hardware issues.

Safety and Assistance:

Ensure the lift is stable and properly aligned with the rack to prevent movement. If needed, have an assistant stabilize the lift while performing the installation steps.

Reference to Official Documentation:

Refer to the Dell EMC PowerEdge XE8640 Installation and Service Manual for specific instructions and diagrams illustrating the rail lock mechanism and proper installation procedures.

Dell EMC PowerEdge XE8640 Installation and Service Manual: This manual provides detailed guidelines on the proper use of rail kits and the mechanism for releasing rail locks during server installation.

Dell EMC Technical Specifications Guide: Offers comprehensive details on the hardware specifications and installation processes for Dell PowerEdge servers, including rail systems and locking mechanisms.

Options Selected by Other Users:

Question 2

A deployment engineer is preparing to install three PowerEdge XE9680 servers in a rack supplied by the customer.

What must they before going on-site to install the servers?

AThe rack can accommodate the length of the servers.

BThe customer completed the required training on the server.

CThe rack will have a top-of-rack switch.

DThe rack has at least six PDUs and two power sources.

Correct : A

Server Dimensions and Rack Compatibility:

The Dell PowerEdge XE9680 is a large server with specific dimensional requirements. Ensuring that the customer's rack can accommodate the physical length and depth of the server is crucial for a successful installation.

Rack Depth and Space Requirements:

Measure the depth of the customer's rack to ensure it is sufficient to house the XE9680 servers. The server's dimensions, including its length, should be verified against the available space in the rack.

Server Length Specification:

The PowerEdge XE9680 has a significant depth, typically around 800mm (31.5 inches). The rack must be deep enough to support the full length of the server, including any cable management and airflow requirements.

Checking Rack Specifications:

Verify that the rack adheres to standard dimensions suitable for hosting enterprise-grade servers. Ensure that the rack has appropriate mounting options, such as square or threaded holes compatible with the server's rail kit.

Pre-installation Verification:

Before arriving on-site, confirm with the customer that their rack meets the necessary specifications. This includes checking for sufficient clearance at the rear for cable connections and at the front for proper airflow.

Importance of Proper Fit:

A rack that cannot accommodate the length of the servers will result in installation failure, potential damage to the hardware, and inefficient cooling. It may also pose safety risks during and after installation.

Reference and Documentation:

The Dell EMC PowerEdge XE9680 Installation and Service Manual provides detailed information on the server's dimensions and the necessary rack specifications. This manual should be consulted to ensure all pre-installation requirements are met.

Dell EMC PowerEdge XE9680 Installation and Service Manual: This manual provides comprehensive guidelines on the server's physical dimensions and the necessary rack specifications for proper installation.

Dell EMC Technical Specifications Guide: Offers detailed specifications and requirements for rack compatibility and server installation procedures.