Dell EMC D-PWF-DS-23 Exam Questions - Navigate Your Path to Success

Correct : B

To calculate the required journal capacity, we need to consider the maximum cumulative writes that might occur during an outage. The calculation is based on the application's write bandwidth and the duration of the supported outage. For an application generating 2 GB/s of writes, using a 2-hour outage (which is 7200 seconds), the journal capacity reservation needed is:

JournalCapacity=WriteBandwidthOutageDuration

JournalCapacity=2GB/s7200s=14400GB

However, since the question specifies that the outage is under two hours, we use the minimum outage allowance of 1 hour for the calculation, which is 3600 seconds. Therefore, the correct calculation is:

JournalCapacity=2GB/s3600s=7200GB

But considering the recommendation to use three hours in the calculations for safety, the needed capacity would be approximately 10.547 TB, which is roughly 10.800 GB12. Hence, the verified answer is 10.800 GB.

Correct : A

By changing the granularity of the PowerFlex storage pool from fine to medium, the architect improved the performance of the system. Medium Granularity (MG) storage pools are recommended for environments where I/O performance and low latency are critical, such as Virtual Desktop Infrastructure (VDI) deployments1.

Here's a detailed explanation of the change:

Fine Granularity (FG): FG storage pools are designed for space efficiency and enable features like inline compression, which can reduce the size of volume data depending on its compressibility. However, this can come at the cost of performance due to the overhead of compression and the smaller space allocation block size2.

Medium Granularity (MG): MG storage pools, on the other hand, provide supreme I/O performance with the least latency to virtual machines and applications. They use a larger space allocation block size of 1 MB, which is more efficient for I/O operations compared to the 4 KB block size used in FG storage pools1.

Performance Improvement: By switching to an MG storage pool, the architect ensured that the storage volumes provide better I/O performance and lower latency, which is essential for applications that require fast and responsive storage access1.

This change aligns with the best practices for PowerFlex storage provisioning, where the selection of granularity is based on the specific performance and space efficiency needs of the customer's workload1.