Fortinet FCSS_EFW_AD-7.4 Exam Questions - Navigate Your Path to Success

The Fortinet FCSS - Enterprise Firewall 7.4 Administrator (FCSS_EFW_AD-7.4) exam is a good choice for Fortinet Network Security Engineers and Security Administrators and if the candidate manages to pass Fortinet FCSS - Enterprise Firewall 7.4 Administrator exam, he/she will earn Fortinet Certified Solution Specialist, Fortinet FCSS Fortinet Certified Solution Specialist Network Security Certifications. Below are some essential facts for Fortinet FCSS_EFW_AD-7.4 exam candidates:

In actual Fortinet FCSS - Enterprise Firewall 7.4 Administrator (FCSS_EFW_AD-7.4) exam, a candidate can expect 36 Questions and the officially allowed time is expected to be around 70 Minutes.
TrendyCerts offers 57 Questions that are based on actual Fortinet FCSS_EFW_AD-7.4 syllabus.
Our Fortinet FCSS_EFW_AD-7.4 Exam Practice Questions were last updated on: Apr 23, 2025

Sample Questions for Fortinet FCSS_EFW_AD-7.4 Exam Preparation

Question 1

Refer to the exhibit, which shows an ADVPN network

FCSS_EFW_AD-7.4 Exam Question 1 Exhibit 1

An administrator must configure an ADVPN using IBGP and EBGP to connect overlay network 1 with 2.

What two options must the administrator configure in BGP? (Choose two.)

Aset ebgp-enforce-multrhop enable

Bset next-hop-self enable

Cset ibgp-enforce-multihop advpn

Dset attribute-unchanged next-hop

Correct : A, B

In this ADVPN (Auto-Discovery VPN) network, there are two hubs (Hub A and Hub B) connected via EBGP, while IBGP is used within each overlay. To ensure proper BGP routing between the overlays, the administrator must configure specific BGP options..

set ebgp-enforce-multihop enable

By default, EBGP requires directly connected neighbors. Since Hub A and Hub B are not directly connected but reach each other over an IPsec tunnel, multihop must be enabled for EBGP sessions to work.

set next-hop-self enable

In IBGP, the next-hop attribute does not change by default. When an IBGP route is advertised from a spoke to another hub or spoke, the next-hop needs to be updated to ensure proper reachability. Enabling next-hop-self forces the BGP speaker to advertise itself as the next-hop, ensuring that all spokes properly reach routes across the overlays.

Options Selected by Other Users:

Question 2

Refer to the exhibit.

A pre-run CLI template that is used in zero-touch provisioning (ZTP) and low-touch provisioning (LTP) with FortiManager is shown.

FCSS_EFW_AD-7.4 Exam Question 2 Exhibit 1

The template is not assigned even though the configuration has already been installed on FortiGate.

What is true about this scenario?

AThe administrator did not assign the template correctly when adding the model device because pre-CLI templates remain permanently assigned to the firewall

BPre-run CLI templates are automatically unassigned after their initial installation

CPre-run CLI templates for ZTP and LTP must be unassigned manually after the first installation to avoid conflicting error objects when importing a policy package

DThe administrator must use post-run CLI templates that are designed for ZTP and LTP

Correct : B

In FortiManager, pre-run CLI templates are used in Zero-Touch Provisioning (ZTP) and Low-Touch Provisioning (LTP) to configure a FortiGate device before it is fully managed by FortiManager.

These templates apply configurations when a device is initially provisioned. Once the pre-run CLI template is executed, FortiManager automatically unassigns it from the device because it is not meant to persist like other policy configurations. This prevents conflicts and ensures that the FortiGate configuration is not repeatedly applied after the initial setup.