HPE7-A02 Exam Questions - Navigate Your Path to Success

The HP Aruba Certified Network Security Professional Exam (HPE7-A02) exam is a good choice for HP Security Analysts HP Network Security Engineers and if the candidate manages to pass HP Aruba Certified Network Security Professional Exam, he/she will earn HP Aruba, HP ACNSP Certifications. Below are some essential facts for HP HPE7-A02 exam candidates:

In actual HP Aruba Certified Network Security Professional Exam (HPE7-A02) exam, a candidate can expect 70 Questions and the officially allowed time is expected to be around 105 Minutes.
TrendyCerts offers 130 Questions that are based on actual HPE7-A02 syllabus.
Our HPE7-A02 Exam Practice Questions were last updated on: Mar 06, 2025

Sample Questions for HPE7-A02 Exam Preparation

Question 1

HPE Aruba Networking Central displays a Gateway Threat Count alert in the alert list. How can you gather more information about what caused the alert to trigger?

AUse HPE Aruba Networking Central tools to run a Network Check on the gateway with which the alert is associated.

BUse Live Monitoring on the gateway to download a packet capture of recent traffic flowing through the gateway.

CCheck the threat list for the gateway associated with the alert. Access threat details and download packet info.

DCheck the gateway's Audit Trail in HPE Aruba Networking Central for more details about the threats that triggered the alert.

DCheck the gateway's Audit Trail in HPE Aruba Networking Central for more details about the threats that triggered the alert:
Incorrect:
The Audit Trail tracks configuration changes and administrative actions, not the details of detected threats.
It is not relevant for investigating the Gateway Threat Count alert.
Final Recommendation
To gather more information about what caused the Gateway Threat Count alert to trigger, check the threat list for the associated gateway. This provides detailed threat information and the option to download packet data for further analysis.
Reference
HPE Aruba Networking Central Threat Management Guide.
Understanding Gateway IDS/IPS Alerts in Aruba Central Documentation.
Best Practices for Threat Investigation Using Aruba Central.

Correct : C

Gateway Threat Count Alert

This alert indicates that the gateway has detected threats in traffic passing through it. HPE Aruba Networking Central provides tools to investigate and analyze these threats in detail.

Analysis of Each Option

A . Use HPE Aruba Networking Central tools to run a Network Check on the gateway with which the alert is associated:

Incorrect:

Network Check tools in Central are primarily used for connectivity and performance diagnostics, not for analyzing detected threats.

This does not provide insight into the specific threats triggering the Gateway Threat Count alert.

B . Use Live Monitoring on the gateway to download a packet capture of recent traffic flowing through the gateway:

Incorrect:

Live Monitoring and packet capture can provide raw traffic data, but interpreting this requires significant manual analysis.

The Gateway Threat Count alert already provides summarized threat insights that are easier to access via the threat list.

C . Check the threat list for the gateway associated with the alert. Access threat details and download packet info:

Correct:

The threat list is specifically designed to display detailed information about detected threats, such as their type, severity, and source/destination.

Administrators can access this list in Central for the affected gateway, view granular details, and even download associated packet data for deeper inspection.

Options Selected by Other Users:

Question 2

The following firewall role is configured on HPE Aruba Networking Central-managed APs:

wlan access-rule employees

index 3

rule any any match 17 67 67 permit

rule any any match any 53 53 permit

rule 10 5 5.0 255.255 255.0 match any any any deny

rule 10.5 0.0 255.255 0.0 match 6 80 80 permit

rule 10.5 0.0 255.255.0.0 match 6 443 443 permit

rule 10.5.0.0 255.255.0.0 match any any any deny

rule any any match any any any permit

A client has authenticated and been assigned to the employees role. The client has IP address 10.2.2.2. Which correctly describes behavior in this policy?

AHTTPS traffic from 10.2.2.2 to 10.5.5.5 is denied.

BHTTPS traffic from 10.2.2.2 to 203.0.113.12 is denied.

CTraffic from 10.5.3.3 in an active HTTPS session between 10.2.2.2 and 10.5.3.3 is permitted.

DTraffic from 198.51.100.12 in an active HTTP session between 10.2.2.2 and 198.51.100.12 is denied.

Correct : A

Policy Analysis:

Rule Evaluation Order: Rules are applied in sequential order until a match is found.

Key Points:

DHCP traffic (UDP 67) is permitted.

DNS traffic (UDP 53) is permitted.

Traffic to 10.5.5.0/24 is explicitly denied.

HTTP traffic (TCP 80) is allowed only to 10.5.0.0/16.

HTTPS traffic (TCP 443) is allowed only to 10.5.0.0/16.

All other traffic to 10.5.0.0/16 is denied.

Any other traffic not matching the above rules is permitted.

Scenario Analysis:

The client IP 10.2.2.2 does not fall within the 10.5.0.0/16 subnet.

Rule 3 denies traffic to 10.5.5.5, regardless of the source IP.

Option A: Correct. HTTPS traffic to 10.5.5.5 is explicitly denied by Rule 3.

Option B: Incorrect. Traffic to 203.0.113.12 is permitted due to the final 'permit any' rule.

Option C: Incorrect. The client (10.2.2.2) does not belong to the subnet 10.5.0.0/16, so traffic to 10.5.3.3 is not permitted by Rule 5.

Option D: Incorrect. HTTP traffic to 198.51.100.12 is allowed by the last 'permit any' rule.