1. Home
  2. NetApp
  3. NetApp Accredited Hardware Support Engineer
  4. NS0-093 Exam Info

NetApp NS0-093 Exam Questions - Navigate Your Path to Success

The NetApp Accredited Hardware Support Engineer Exam (NS0-093) exam is a good choice for NetApp Hardware Support Engineers and if the candidate manages to pass NetApp Accredited Hardware Support Engineer Exam, he/she will earn NetApp Accredited Hardware Support Engineer Certification. Below are some essential facts for NetApp NS0-093 exam candidates:

  • TrendyCerts offers 61 Questions that are based on actual NetApp NS0-093 syllabus.
  • Our NetApp NS0-093 Exam Practice Questions were last updated on: Mar 07, 2025

Sample Questions for NetApp NS0-093 Exam Preparation

Question 1

A node has panicked with a PCI/NMI error. Giveback has not been performed.

Which two commands should you run to collect the logs to determine the cause? (Choose two.)

Correct : A, C

To diagnose a PCI/NMI error and collect logs, use the following commands:

1. pelog --a --g=2

What it does: This command collects PCI error logs, including detailed information about PCI devices and the errors that caused the panic.

How to use: Run the command from the nodeshell to capture the required PCI log entries.

2. rdfile /mroot/etc/log/SSRAM

What it does: This command reads the SSRAM log file, which contains low-level error information related to PCI and other hardware subsystems.

How to use: Run the command to view the log entries directly for detailed troubleshooting.

Why Other Options Are Incorrect:

B . show pci --v:

While this command displays PCI device information, it does not provide detailed error logs.

D . event log show:

This displays event log entries but does not contain the specific PCI or NMI-related logs required for diagnosing the panic.


'ONTAP Hardware Troubleshooting Guide' lists pelog and SSRAM as tools for analyzing PCI errors.

'ONTAP Panic Analysis Guide' emphasizes the importance of collecting detailed hardware logs.

Options Selected by Other Users:
Question 2

Which two steps are required to replace a drawer in a DS460c shelf? (Choose two.)

Correct : B, D

To replace a drawer in a DS460c shelf, the following steps must be taken:

1. Disconnect the cable chains from the chassis

Why this is required: Cable chains connect the drawer to the shelf and must be disconnected to safely remove the drawer.

2. Evacuate all drives in the drawer

Why this is required: Drives must be removed to avoid damage during the drawer replacement process and to reduce the weight of the drawer for safe handling.

Why Other Options Are Incorrect:

A . Shut down both nodes:

This is unnecessary because DS460c shelves support online replacement, and the system can remain operational.

C . Power off the shelf:

This is also unnecessary. DS460c shelves are hot-swappable, meaning they do not require the shelf to be powered down.


'DS460c Hardware Service Guide' explains the procedure for replacing a drawer.

NetApp's 'Field Replacement Guide' for DS460c shelves emphasizes online and hot-swappable replacements.

Options Selected by Other Users:
NetApp NS0-093